[Q] M8 won't go past splash screen topic

HI guys, so I can't get my M8 to go past the splash screen. I've tried countless ROMs (even stock 4.4.2 from Android Revolution), all of which say they install fine, but nothing. Even when I restore a TWRP back-up it fails to boot. I'm S-ON and was rooted. I've tried wiping System, data, dalvik, cache, factory reset. Nothing happening.

Any ideas? I'm stumped ...

Recoveries won't let me flash any zip files topic

Hi guys
So I'm using a moto G 4G (XT1039) and have tried many different variants of TWRP and CWM yet none of them are letting me flash any zip files for some reason. It just says 'Installation aborted' or 'failed' even though I've done it the same way many times before. I can still restore backups. I also tried using flashify to see if that would mak a difference but to no avail. Using different zip files didn't help either.

Any ideas??

[Q&A] [Q] Admob won't load ads anymore topic

Q&A for [Q] Admob won't load ads anymore

Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.

Before posting, please use the forum search and read through the discussion thread for [Q] Admob won't load ads anymore. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.

Thanks for understanding and for helping to keep XDA neat and tidy! :)

Won't turn on topic

I went swimming with my ssw3 earlier today, it was never below 30cm and i had showered with it earlier that week, but ever since my swim it doesn't turn on. It has been charging for 3 hours now but still doesn't work :/

Sent from my LG-D802 using XDA Free mobile app

[Q] Xposed won't install topic

I have tried installing it and to no avail. I have root and am S-OFF. This is the error message I get in red at the top of Framework page. "app_process version "58" has been installed previously but version "--" was found now. If you didn't expect an old file to be restored, you might want to try installing via recovery (auto or manual)

How can I fix this?

[Q] CoC won't run topic

Just yesterday, my Clash of Clan game won't run anymore. I am from 3.0 602 beta, just this morning i downgraded into 2.3 136. But still it won't load. I re-downloaded also the game but still not working. other games are running well except my CoC. It is pure black screen. any idea.

[Q] Hard bricked G2 won't appear in /dev/sdb* on linux topic

I was trying this to fix a hard-bricked G2 I just recieved:
http://forum.xda-developers.com/show....php?t=2582142

The device is in the following state:
No download mode
No recovery mode
Shows qhsusb_bulk in lsusb -v
I don't know much more about it (e.g. I don't know if it was rooted or what type of ROM was on it).

I need to unplug the battery by removing the back cover to have a chance to reboot it. The first boot after that it shows the LG logo, then a blank screen (back lit but no text).
(UPDATE: Pressing the power button 8 seconds also reboots the phone without having to unplug the battery).

When I wire it up to my Arch Linux computer here is what the command `dmesg` shows:

Code:

---

[ 3693.728255] usb 1-2: new high-speed USB device number 93 using xhci_hcd
[ 3693.901772] usb 1-2: config 1 has an invalid interface number: 20 but max is 1
[ 3693.901784] usb 1-2: config 1 has no interface number 1
[ 3693.903319] usb-storage 1-2:1.20: USB Mass Storage device detected
[ 3693.903868] scsi host843: usb-storage 1-2:1.20
[ 3694.905067] scsi 843:0:0:0: Direct-Access    Qualcomm MMC Storage      1.00 PQ: 0 ANSI: 2
[ 3694.906568] sd 843:0:0:0: [sdb] 30777344 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 3694.906872] sd 843:0:0:0: [sdb] Write Protect is off
[ 3694.906883] sd 843:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[ 3694.907373] sd 843:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3694.919101]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 sdb22 sdb23 sdb24 sdb25 sdb26 sdb27 sdb28 sdb29 sdb30 sdb31 sdb32 sdb33 sdb34 sdb35 sdb36
[ 3694.923664] sd 843:0:0:0: [sdb] Attached SCSI disk
[ 3695.061360] usb 1-2: USB disconnect, device number 93
[ 3695.065521] sd 843:0:0:0: [sdb] Synchronizing SCSI cache
[ 3695.065552] sd 843:0:0:0: [sdb]
[ 3695.065554] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.065557] sd 843:0:0:0: [sdb] CDB:
[ 3695.065558] cdb[0]=0x28: 28 00
[ 3695.065562] sd 843:0:0:0: [sdb]
[ 3695.065563] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.065565] sd 843:0:0:0: [sdb] CDB:
[ 3695.065566] cdb[0]=0x28:
[ 3695.065567]  00 00 00
[ 3695.065569]  28
[ 3695.065571]  00
[ 3695.065571]  00
[ 3695.065572]  00
[ 3695.065573]  01
[ 3695.065573]  70
[ 3695.065574]  00
[ 3695.065574]  00
[ 3695.065575]  90
[ 3695.065576]  00

[ 3695.065578] end_request: I/O error, dev sdb, sector 368
[ 3695.065579]  80 00 00 f0 00
[ 3695.065582] quiet_error: 134 callbacks suppressed
[ 3695.065583] Buffer I/O error on device sdb, logical block 46

[ 3695.065586] Buffer I/O error on device sdb, logical block 47
[ 3695.065587] Buffer I/O error on device sdb, logical block 48
[ 3695.065589] end_request: I/O error, dev sdb, sector 128
[ 3695.065590] Buffer I/O error on device sdb, logical block 16
[ 3695.065592] Buffer I/O error on device sdb, logical block 49
[ 3695.065594] Buffer I/O error on device sdb, logical block 17
[ 3695.065595] Buffer I/O error on device sdb, logical block 50
[ 3695.065597] Buffer I/O error on device sdb, logical block 51
[ 3695.065598] Buffer I/O error on device sdb, logical block 52
[ 3695.065599] Buffer I/O error on device sdb, logical block 18
[ 3695.065633] sd 843:0:0:0: [sdb]
[ 3695.065636] Result: hostbyte=0x01 driverbyte=0x00
[ 3695.750741] usb 1-2: new high-speed USB device number 94 using xhci_hcd
[ 3695.924146] usb 1-2: config 1 has an invalid interface number: 20 but max is 1
[ 3695.924151] usb 1-2: config 1 has no interface number 1
...

---

Note the "config 1 has an invalid interface number: 20 but max is 1" error, and all the Buffer I/O errors.

Here is the relevant section of `lsusb -v`

Code:

---

Bus 001 Device 054: ID 05c6:9006 Qualcomm, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType        1
  bcdUSB              2.00
  bDeviceClass            0
  bDeviceSubClass        0
  bDeviceProtocol        0
  bMaxPacketSize0        64
  idVendor          0x05c6 Qualcomm, Inc.
  idProduct          0x9006
  bcdDevice            0.00
  iManufacturer          1 LG Electronics Inc.

  iProduct                2 QHSUSB__BULK
  iSerial                3 1234567890ABCDEF
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                9
    bDescriptorType        2
    wTotalLength          55
    bNumInterfaces          2
    bConfigurationValue    1
    iConfiguration          0
    bmAttributes        0x80
      (Bus Powered)
    MaxPower                2mA
    Interface Descriptor:
      bLength                9
      bDescriptorType        4
      bInterfaceNumber        0
      bAlternateSetting      0
      bNumEndpoints          2
      bInterfaceClass      255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                7
        bDescriptorType        5
        bEndpointAddress    0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type              None
          Usage Type              Data
        wMaxPacketSize    0x0200  1x 512 bytes
        bInterval              0
      Endpoint Descriptor:
        bLength                7
        bDescriptorType        5
        bEndpointAddress    0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type              None
          Usage Type              Data
        wMaxPacketSize    0x0200  1x 512 bytes
        bInterval              0
    Interface Descriptor:
      bLength                9
      bDescriptorType        4
      bInterfaceNumber      20
      bAlternateSetting      0
      bNumEndpoints          2
      bInterfaceClass        8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol    80 Bulk-Only
      iInterface              0
      Endpoint Descriptor:
        bLength                7
        bDescriptorType        5
        bEndpointAddress    0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type              None
          Usage Type              Data
        wMaxPacketSize    0x0200  1x 512 bytes
        bInterval              0
      Endpoint Descriptor:
        bLength                7
        bDescriptorType        5
        bEndpointAddress    0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type              None
          Usage Type              Data
        wMaxPacketSize    0x0200  1x 512 bytes
        bInterval              0
Device Status:    0x0000
  (Bus Powered)

---

Is there anything that could be done to fix these Buffer I/O errors so I can mount the phone (and continue with the FIX tutorial posted above)?

Anyone able to shed some lights on the meaning of these lines would be of great help in my quest of learning how to unbrick my phone.

Note: when connected to the computer the blank screen goes in a repeating cycle of being back lit for 1 second then no backlights for 1 second. The cycle stops (with backlights) when unplugging the phone.

[Q] My rom Wont flash topic

So i made a rom and when i type fastboot flashall is works fine but when i try to boot it just gets stuck on google screen i know how to unbrick and all that i just want to know how to fix the problem were i cant boot into my rom

[waterdamage] Wont boot but does charge topic

Hello Eerybody,
About 1 week ago my nexus 4 fell into the water. I quickly shutted it off and did like all the logical steps like drying it etc..
Now 1 week later im trying to use it again. But some how the phone wont boot, But it does charge, and the display works perfect.
When i remove the charger the green LED shows. After about 10 seconds it goes off.
How can i fix this ? It wont boot or anything...

Greets,
Mark

[Q] My new nexus won't start correctly topic

Hello, I'm pretty much new to the android scene therefore excuse me for my stupidness on this field :(
I unlocked my nexus 6, then I rooted it and and then I flashed a custom rom (Euphoria 1.0) with WugFresh's Tool.
Yesterday I tried installing adaway and gave it full root permissions, it asked me to reboot and I did so.
After rebooting I realized that I can't unlock my phone nor do anything else except using the pull down notification bar and having a back button, no middle button nor right button.. The screen just remains black. I tried rebooting in recovery mode but nothing changes.
What do I've to do now?
The device doesn't show up as MTP.
When I enter TWRP now it asks me for a password??
I've a Nandroid backup saved on my HDD and I still have the custom rom ZIP saved as well.

[Q] Motorola G wont charge , constantly boots , tested all quick solutions. topic

hello guys , im making this thread because i didnt find my problem anywhere , so here is the thing
in the last week my moto g was constantly booting , i had the jelly bean room , and rooted , after that i flashed a custom room , the cyanogenoid 11 , and it was the same thing
i looked in a lot of forums that said that an app can be the problem but , i erased all the apps and the same thing happened ,
my pc doesnt detect the moto g when plugged in and when i connect it to the charger wall its the same , no charging .
i tried alot of usb cables and chargers , and it came to the point that the cellphone was at 0% battery , i tried a samsung galaxy tab charger and it worked well ,
then when i tried to charge it again with the same charger , it didnt detect it .
So i dont know if something in my phone its broken , like the usb Ac or something , i dont think that is software , can you guys tell me if there is something that i can do?
the phone its like 6 months old . thanks

Sony Xperia Tipo won't boot topic

Hello,
today i tried to install the C10 software on my Tipo, but after doing it the phone won't start. I rooted the phone, installed the CWM and put the software on the SD Card. Applying the software went smooth, and after the reboot it won't start. What can i do now ?

Cheers

n900a 4.4.4. wont root topic

Ive tried towel and kingo.

Ive seen cf auto root, but not the proper file for my American n900a at&t version..


So am i just stuck and cant root?

[Q] Phone won't boot when installing a custom rom PLEASE HELP ME :( topic

Ok, so basically I picked up an xperia Z the other day. I didn't quite like the stock sony look so I thought why not. Lets root
I rooted successfully using flashtool and a tutorial and youtube, and I installed a dual recovery?
I think that's what it is, but it worked successfuly. I had team win recoovery and it worked fine. So I downloaded cm11 the most stable build which was snapshot m12 and, downladed the gapps. I put them both in my phone and did all the usual format system cache dalvik cache etc....
After it was installed I wanted to reboot my device and it didn't.

All it would do was vibrate and thats it. I cant access recovery, and the sony logo does not even appear.
However I was able to use FT again and I flashed stock sony rom back on to it.

Can someone please tell me what I did wrong and why this is happening. If anyone wanted to know it's the cc603 model and when I went onto service info it said: "Device boot unlockable: yes"

Please help :(

My phone wont recognise USB CABLE! topic

In none of these : fast boot,s/w mtp, PC did not recognize him.
But phone is working,why?I deleted drive from phone?

Content heavy apps won't work on wifi :/ topic

I have been having issues with my wifi connection for over a week, instagram takes a good while to load the pictures, facebook won't load at all, pictures on twitter take a while to load , but chrome works fine and I do have internet, at first I thought it was my Nexus 5, but my housemate is having issues too , so I think it was an android issue since my laptop works just fine but then I noticed that I'm not able to connect to my VPN at all, what could be going on? Do you guys have any idea? :confused: To make things worse the internet company only offers tech support for ethernet but not for wifi :rolleyes:

My LG G Watch won't connect to my Nexus 5 topic

Hi,
My G Watch wont connect to my Nexus 5 and i have tried everything from uninstalling Android Wear app to Resetting Watch. What's the problem?

Optimus G E975 won't start with red flashing led topic

Hi all, I managed to brick my Optimus G E975 (international version) - the inside of the phone shows E975K.

I have it running the stock ROM for over a year (rooted) and lately I am looking into flashing with custom ROM (KitKat). I have not even flash the phone, I just installed ROM Manager app (pro) and used it to boot to recovery. It won't boot to recover, so I use ROM Manager app to install TWRP (to replace clockmodwork). I booted to recovery and I got the fastboot but could not do anything so I rebooted to normal and install clockmodwork again. There was an option to Flash clockmodwork which I think I chose and I assumed that was installing clockmodwork. But when I booted to recovery, my phone never turned on anymore.

While I got my phone working, using ROM Manager I tried few times to make a back up of the current ROM but it was never succeeded. The phone just rebooted normally.

I opened my phone and disconnect the battery as some people suggested. But I still can't turn on the phone. I got flashing red led when I press the power button (with or without the vol up/down).

Please help. I hope I can unbrick my phone as the warranty is over.

Any info and help would be appreciated. Thank you.

Adaway won't install stuck on download host files topic

I rooted my lg g3 with purpledark thing. Installed SU (wanted get some savefiles from my other phone)
And i installed adaway but it wont install. It keeps on downloading. For like 5min.
Is that normal?

[Q] Htc m8 Wifi wont turn on. topic

Hi to all, recently i got my m8 but wifi wont turn on at all. I got soff, unlocked by htcdev, rooted and arhd rom and elemental kernel.
I need help pls i read in a thread about flashing boot. Img for fixing my issue but im confused.