LG G2 brick topic

I have a rooted LG G2 D802 with XPosed Framework installed.
I installed applications update from internal upgrade center app (something like 5MB).
When it rebooted it keeped going to TWRP recovery.

From recovery I tried wiping Dalvik Cache, System and Cache and then rebooting, but again it keeped going to TWRP.

Then I tried tryping the following instructions from the TWRP terminal command:

Code:

---

dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota

---

and

Code:

---

dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc

---

I rebooted and now it is stuck on LG logo.
What could I do?

[Q] [q] hard brick topic

Hello Dev
Maybe I was too tired If I have to read entire post here to see if there is someone post a problems match with mind. ( I am sorry ). No one match with my cases.
My phone has been root.
My problem is I bricked my phone after flashing cwm from a similiar phone, because I need cwm to make nandroid backup.
My stock cwm can not make nandroid backup. It's only backup data and system only.
Tried using online nandroid and the result is I have no boot and recovery image.
So I search all of thread from all android community but none of there discussion my phone.
And then I found very similiar phone named is Hisense EG970, my phone is Esia Andromaxx-D( also called as Esia Maxpic). Both is have same spec like this :
RAM 1GB
ROM 4GB
OS Android 4.1
CPU Qualcomm MSM8625Q, 1.2GHz
2G: GSM: 900/1800/1900MHZ
3G: CDMA1X EVDO：800MHZ
Sim Card Dual SIM Card Dual Standby
Service Provide Unlocked
Size 5.0 Inch
Screen IPS, capacitive touch screen
Resolution 960 x 540 pixels
Screen Color 1600K Colors
Dual Camera 0.3MP front camera, 8.0MP back camera with flashlight,up to 3264 X 2448 pixels resolution
Battery 2000mAh.
My phone : (include spec above)
Model number E1000
Front camera 2 MP, Back camera 8 MP with flashlight
GPU Adreno 203
Build number TBE595621_8961_V000117
OS android 4.1.2
Kernel Version 3.4.0-perf-g197915f-00004-ga4b8a8f ccadmin@BUILD12
MY stock Rom is same as K Touch Lotus 2
I found hisense EG970 thread( Chinesse forum) about cwm recovery for their phone. Because I think this is the same with mind so I flashed their cwm.
I don't know I am stupid or not but after that my phone brick. (Hard Brick). Three combination button not effect anymore and my PC never detect it again. I tried to connect it with original usb cable without battery while pushing vol + and - together and insert battery but still not appears anymore in my Windows 7 PC. ( NO THREE FINGERS WORK,CAN'T ENTER BOOTLOADER MODE ALSO CAN'T ENTER RECOVERY MODE, NO PC DETECTED)
I am sorry for long explanation.
So I need your help, anyone here.
Can I get my stock cwm back?
very grateful if someone would help me, thanks in advance

[Q&A] [GUIDE] Recover From Soft Brick ! S-On Unlocked ! topic

Q&A for [GUIDE] Recover From Soft Brick ! S-On Unlocked !

Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.

Before posting, please use the forum search and read through the discussion thread for [GUIDE] Recover From Soft Brick ! S-On Unlocked !. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.

Thanks for understanding and for helping to keep XDA neat and tidy! :)

LG G3 Unseen Brick - Can't boot into download mode [VIDEO] topic

youtube[[DOT]]com/watch?v=vweWcReTkv0

Can't post external links yet - please replace [[DOT]] with a .

Where can I find help to this boot loop? Has anyone seen one like this before?
Phone had been previously rooted using purple drake, I then updated to 5.0 and after a few days got stuck into a normal boot loop "LG logo->Restart->LG Logo->Restart".

I then tried to re-flash a stock rom to fix the loop and got this loop when I replugged the USB cable during the installation process.

[Q] Brick Through Fonter topic

Hey Guys

I'm new so I don't know where to put this but I bought a new Tablet from Gigaset recently.
I googled around looking for a root and found one. I rooted it, then installed the Xposed
Installer. This all worked fine, so I downloaded Fonter. I changed the Font a few times and
it worked fine. Then I enabled expert mode in the settings, so that it would not only
replace the normal font, but also italic and bold fonts. Then I restarted it, and now it won't
boot. The startup sound plays, and my custom bootlogo appears, and then it never moves
on. I tried using Funtdo and Oneclick unbrick, but neither worked. I have unlocked the
bootloader, but I haven't installed any custom roms. It runs on Android 4.2.2.

Any Help would be gladly appreciated.:fingers-crossed:
Thanks a lot

-deadrats

[Q] TWRP brick topic

OK, I did search and found nothing. So, I need to ask this somewhere, hopefully this is the place. The similar threads search did not seem to help much.

I have a Tab S 8.4 WiFi. I rooted it and was running Cyanogen 12. I noticed the TWRP 2.8.3.0 update, so I went to install it. TWRP manager kept crashing, so I went to the TWRP site and downloaded the SM-T 700 klimti wifi img file. I used Flashify to flash this, as I have done numerous times. I wish I'd extracted and flashed the zip in TWRP, but I did not. Everything acted normal but when the tab went to boot up it got to the Black screen that announces Samsung Galaxy S, SM-T700, Powered by android. This was it. It flashed this screen constantly every second or so. Non stop. There was nothing any button combination would do. Except it will go into download mode. Nothing else. No hard reset, nothing. Download mode it it. I spent lots of time looking at various tutorials to see what I'd missed, nothing but download mode. So, I had Odin on the computer and the latest firmware from SamMobile, so I figured I could start over and get the tablet functioning. I've used Odin a fair amount before, including the original Galaxy, S III, S4, so I'm not unfamiliar with the process.

So, Odin acts like it is doing its thing, runs through all the steps, says at the end Pass and all threads succeeded, none failed. At the end of the Odin process the tablet acts like it is booting. Up comes the Samsung name with the Bluish sparkly oval along with the standard Samsung tones we hear heading into the boot. That is as far as it goes. The blue and pink colors fade out and I am left with a black screen with SAMSUNG in the middle. Again, no button combination except download mode works at all. It just stays there. Pass showing proudly on the Odin screen. I downloaded and tried flashing all of the various firmwares, same result. I even let the battery drain to zero hoping that would shut it off. It seemed to, but the results were the same, only the download mode combination will do anything.

There is likely user error here (and realize I might kick myself in the end...Oh wait, I already have), but I've run in circles enough to realize I'm probably doing the same sequence with the same error and I not able to see what it is.

Does anyone have any idea what is wrong or how to fix this? I hope it is fixable. I had hope since download and Odin at least go through the motions. I would greatly appreciate any advice, suggestions, or help. Thanks in advance.

How I can back stock firmware Brick m7 topic

Htc One m7
Cıd htc 102
I using hasoon all one tollkıt relock bootlader
After ı dowloand 3 ruu files all error 155 ı cant understand.
I read other topic. Hboot is problem. How ı can back stock firmware now dont open phone... Thanks for help

[Q] Note 3 [SM-N900P] special brick. Dire need of assistance. topic

Hello, I know for a fact that there are other "help me! I bricked my note 3" threads out there, but I have concluded that I find myself in quite a specially convoluted situation.
All the following occurred with me coming from a stock 4.3 rooted rom.
My story begins when I attempted to flash Fre3 4.4.2 ROM using TWRP. The rom included the"beastmode" kernel. Well, after flashing I ended up stuck in the bootloader screen with a "Set warranty bit: kernel" error. Being such a huge noob as I am, I googled for a solution to this, and I ended up with a flashable .zip that was supposed to fix such kernel issue, upon inspection of the zip file I found a clean_efs.sh script. Then again, being such a noob I had no Idea what "efs" meant, and against my better judgement, I had flashed it anyway..

Long story short the previous made me end up with a bootloop, which prompted me to restore my nandroid from my stock 4.3 rom... At first It would give me an error regarding the MD5 checksums, it prompted me to disable md5 verification, which WAS disabled, yet the same error persisted..
As a last resort I tried to use ODIN 3.07 with the stock 4.3 release, it was flashed successfully, but as soon as it got to the "Sprint" bootlogo, it would reboot itself into an infinite loop.. Afterwards I tried to do a data/wipe/factory reset form the stock recovery which was done successfully. Afterwards the phone booted past the sprint logo and all i could see was: The status bar with the signal bars with a red cross, a completely black screen, and a dreaded "Process system is not responding" dialog. Tapping on "wait" or "stop" just closed the dialog and the phone rebooted regardless. :(

I am pretty much stuck at this point... Please I beseech whoever has solved such an issue to help me, I am not really able to afford another note 3, but I can afford to reward anyone that can help me solve this(that desperate I am:fingers-crossed:)...
And to make matters worse, I am getting the galaxy gear for Xmas....go figure..

P.S. I still have a NANDroid of my beloved 4.3 and it does have an EFS backup, I have no way of knowing if it is corrupted or not... Also I'll attach the "clean_efs" zip so you can tell me how a huge noob I am(not really just for reference)...

Attached Files

Brick_Loop_FIX_afterRestoringBackup.zip - [Click for QR Code] (151.8 KB)

i317 Bricked Odin Pass but Still Brick topic

Like my title says I have a i317 Note II on AT&T. It was bricked a while back I tried factory reset which sent it into a boot loop until the battery drained now it is just a brick and wont start but past the Samsung logo.

I ran Odin v3.09 with a Pass but the phone is still doing the same thing. Not sure where to go after this. Do I need to run a new bootloader file? Any help would be great. :cowboy:

These are the files I ran with it:
i317.pit
I317-UCUBMK6.tar.md5

Attachment 3062724

Attached Thumbnails

 

soft brick every time i update stock rom topic

HTC ONE (M7) Sprint

hboot 1.57
s-on
unlocked

recently used guru reset to go back to stock rom, worked fine until I tried to update the phone and get stuck on boot screen. loaded up twrp again and sideloaded another guru reset... did the same thing, worked until i did an update and gets stuck at boot screen when update is complete.

need help badly! did i brick my phone? topic

need help
hello, i just downloaded the latest firmware NK2 link from the general thread, and run it thru Odin, and i unzip it. and Odin says PASS, but when turned it on my phone only stuck at the T-Mobile 4G LTE. whats wrong? what i need to do? help pls. thanks.

edit: i re do the odin, and now i got failed right away! now i cannot do the odin anymore. it gets failed right away. did i brick my phone? also if i turned it on it says

odin mode
product name : sgh-m919
current binary: samsung official
system status: custom
knox kernel lock: 0x0
knox warranty void: 0x0
csb-config-lsb: 0x30

write protection: enabl
eMMc: burst mode enabled

and it has a picture of phone yellow triangle with asterisk inside and computer

firmware upgrade encountered an issue. please select recovery mode in kies and try again.

pls help.

Seems a for place a brick discussion? topic

Have you got this phone in brick status and can't get a fix? ME TOO! I hope everyone with a brick of any type will come here and tell us how youbfixed it. Or ask how to fix. This is mostly for the optics l90 so please respect the tone! Hope this works.

Brick after updating to 4.4.4 topic

I wanted to flash lollipop on gpe but it failed, after getting out of that without victory, I flashed the stock xt1032 and it was all okay, i updated to 4.4.4 but after recovery finished it just went black, makes sound when connected to pc but I cant enter bootloader, no led light or screen light